Learn More
RDL-3000 at a glance
- Optimized for 4G / LTE networks
- Software configured wireless system for PTP and PMP applications
- Industry leading 120 Mbps UBR with up to 100 Mbps Ethernet throughput using 2 x 2 MIMO
- Fully backwards compatible with the AN-80i
- Exceptional long-range capabilities
- Highest capacity system in the industry
- Lowest end-to-end latency
- Flexible software controlled speed and channel size selection
- QoS controls to differentiate and prioritize traffic groups
- Per-link dynamic TDD, ARQ & adaptive modulation/coding
- All outdoor configuration with IEEE 802.3at PoE
- Synchronization option for collocated units (internal or GPS)
RDL-3000 System
The RDL-3000 is Redline’s next-generation wireless system. The RDL-3000 incorporates 2 X 2 multiple-in, multiple-out (MIMO) and enhanced 4th generation wireless technology to deliver industry-leading throughput and range along with Redline’s leading low latency making it ideal for next generation 3G and 4G / LTE networks. Chosen for its ability to be configured by software to provide point-to-point (PTP) or point-to-multipoint (PMP) links, the RDL-3000 is ideal for ultra high-capacity, extreme-range, specialized wireless applications. Telecom service providers, local and state governments, the oil and gas industry and military organizations throughout the world use the RDL-3000.
Overview
The RDL-3000 is configured via software options and speed keys allowing you to purchase the features and throughput performance you need today and upgrade later without having to replace any hardware. With a simple software download, the RDL-3000 can be configured as PTP or PMP or can run specialized applications, from video surveillance to data acquisition, from high performance to ultra-high performance. This approach simplifies network design and logistics while providing a high level of future-proofing.
Powered by Redline’s innovative fourth-generation orthogonal frequency-division multiplexing (OFDM) technology, the RDL-3000 uses powerful hardware accelerators and MIMO technology that achieves the highest throughput, with industry's best spectral efficiency, the lowest latency and the greatest line-of-sight (LOS) and non-line-of-sight (NLOS) ranges in the industry.
The RDL-3000 is fully compatible with Redline’s AN-80i, allowing existing AN-80i networks to easily upgrade to higher capacity and range by replacing only sector controllers. In the PTP configuration, the RDL-3000 has excellent range - 100 kilometers - and delivers up to 100 Mbps Ethernet data rate, which is more than double the nearest competitor, making it the ideal choice for high-capacity backhaul applications.
In the PMP configuration, the RDL-3000 delivers up to 100 Mbps Ethernet data rate, the highest in its class, and it supports a full range of quality of service (QoS) controls to enable premium access services for voice, data and video. Its industry-leading capacity also supports the maximum number of video cameras with the highest video quality. With either configuration, you are assured of the ultra-low latency - less than 10 milliseconds, which is as much as 10 times lower than the competition.
Both user and management data are protected with FIPS 140-2, X.509 authentication and AES encryption.
Available with a wide variety of antennas, the RDL-3000 is easy to install and manageable over-the-air (OTA) via Redline’s powerful ClearView Management System. Designed to meet stringent carrier-class requirements and IP67 rated for outdoor deployment, the powerful, versatile and reliable RDL-3000 is ideal for specialized point-to-point and point-to-multipoint wireless applications where high capacity, extreme range, security and reliability are paramount.
Specifications
|
System Capability |
LOS, optical-LOS, and non-LOS |
|
Wireless Transmission |
OFDM (orthogonal frequency-division multiplexing) MIMO A/B 2 x 2, TDD |
|
RF Band
|
4.940–5.875 GHz1, 470–698 MHz1 |
|
Channel Size |
3.5, 5, 7, 10, 14, 20, MHz1 (software selectable) |
|
Data Rate |
Up to 120 Mbps UBR |
|
Processing Speed |
>150,000 PPS |
|
Max Range |
100+ km (66+ mi) |
|
Max Tx Power |
+25 dBm (region specific) |
|
GPS |
Built-in (software keyed) |
|
PoE Cable |
Up to 91 m (300 ft) |
|
Network Attributes |
Transparent bridge, automatic link distance ranging, DHCP pass-through, 802.1Q VLAN, CIR, PIR support |
|
Modulation |
BPSK to 64 QAM |
|
MAC |
TDMA, Dynamic ARQ (per-link), Dynamic adaptive modulation (per-link), Dynamic and fixed TDD (per link) |
|
QoS |
Multiple service flows per subscriber, 802.1 p/Q |
|
Over the Air Encryption |
AES-1281 and AES-2561 (software keyed) |
|
Network Connection |
10/100 Ethernet (RJ-45) |
|
Management |
HTTP (Web) interface, SNMP v2 / v3, Telnet, HTTPS (SSL), SSH, ClearView |
|
Operating Temp |
-40oC to 60oC (-40oF to 140oF) |
|
Humidity |
100% humidity, condensing |
|
Power Consumption |
Standard IEEE 802.3at |
|
Compliance |
Safety: IEC, EN, and UL/CSA 60950 5.8 GHz1: IC RSS-210, FCC Part 15,ETSI EN 302 502 3.65 GHz1: IC RSS-197 3.3-3.8 GHz1: ETSI EN 302 326-2 2.3 GHz1: IC RSS-195 600 MHz1: IC RSS-1962, FCC Part 15H2 Security: FIPS 140-23 |
|
Enclosure |
IP67 |
|
Dimensions |
290.7 mm x 268.4 mm x 63.5 mm (11.45 in x 10.57 in x 2.50 in) |
|
Weight |
2.7 Kg (6 lbs) without bracket or antenna |
1. Availability restricted by regional regulations or product options
2. Pending
3. In-process
Documentation
- Redline Product Brochure (PDF)
- RDL-3000 Datasheet (PDF)
SITEMAP